191 – Solid carbide upcut spiral bits

191 – Solid carbide upcut spiral bits

30,13332,21 VAT included 19,58 - 215,94 VAT included

Your All Available Variations

Code D I S L prezzo Disp. Scegli quantità
191.001.11 3,18 mm. 12,7 mm. 6,35 50,8 mm. 40,26 VAT included 26,17 VAT included
191.003.11 3,97 mm. 12,7 mm. 6,35 50,8 mm. 40,26 VAT included 26,17 VAT included
191.005.11 4,76 mm. 19,05 mm. 6,35 50,8 mm. 40,26 VAT included 26,17 VAT included
191.007.11 6,35 mm. 19,05 mm. 6,35 50,8 mm. 36,36 VAT included 23,63 VAT included
191.008.11 6,35 mm. 25,4 mm. 6,35 63,5 mm. 38,19 VAT included 24,82 VAT included
191.030.11 3 mm. 12 mm. 3 50 mm. 30,13 VAT included 19,58 VAT included
191.040.11 4 mm. 15 mm. 4 50 mm. 33,06 VAT included 21,49 VAT included
191.050.11 5 mm. 17 mm. 5 50 mm. 40,26 VAT included 26,17 VAT included
191.060.11 6 mm. 27 mm. 6 70 mm. 44,77 VAT included 29,10 VAT included
191.080.11 8 mm. 22 mm. 8 70 mm. 51,00 VAT included 33,15 VAT included
191.081.11 8 mm. 32 mm. 8 80 mm. 56,36 VAT included 36,63 VAT included
191.082.11 8 mm. 42 mm. 8 90 mm. 64,66 VAT included 42,03 VAT included
191.100.11 10 mm. 32 mm. 10 80 mm. 88,33 VAT included 57,41 VAT included
191.101.11 10 mm. 42 mm. 10 90 mm. 103,46 VAT included 67,25 VAT included
191.120.11 12 mm. 35 mm. 12 83 mm. 123,83 VAT included 80,49 VAT included
191.121.11 12 mm. 42 mm. 12 90 mm. 137,74 VAT included 89,53 VAT included
191.122.11 12 mm. 52 mm. 12 100 mm. 143,35 VAT included 93,18 VAT included
191.140.11 14 mm. 50 mm. 14 110 mm. 196,54 VAT included 127,75 VAT included
191.160.11 16 mm. 55 mm. 16 110 mm. 239,97 VAT included 155,98 VAT included
191.161.11 16 mm. 35 mm. 16 90 mm. 214,35 VAT included 139,33 VAT included
191.200.11 20 mm. 60 mm. 20 120 mm. 332,21 VAT included 215,94 VAT included
191.501.11 7,94 mm. 25,4 mm. 12,7 76,2 mm. 116,39 VAT included 75,65 VAT included
191.503.11 9,52 mm. 31,75 mm. 12,7 76,2 mm. 116,39 VAT included 75,65 VAT included
191.505.11 12,7 mm. 31,75 mm. 12,7 76,2 mm. 116,39 VAT included 75,65 VAT included
191.506.11 12,7 mm. 38,1 mm. 12,7 88,9 mm. 135,18 VAT included 87,87 VAT included
191.507.11 12,7 mm. 50,8 mm. 12,7 101,6 mm. 152,38 VAT included 99,05 VAT included
191.509.11 15,88 mm. 55 mm. 15,88 109,5 mm. 186,05 VAT included 120,93 VAT included
191.511.11 19,05 mm. 55 mm. 19,05 109,5 mm. 273,04 VAT included 177,48 VAT included
191.630.11 3 mm. 12 mm. 6 60 mm. 42,70 VAT included 27,76 VAT included
191.640.11 4 mm. 15 mm. 6 60 mm. 42,70 VAT included 27,76 VAT included
191.650.11 5 mm. 17 mm. 6 60 mm. 42,33 VAT included 27,51 VAT included
191.800.11 10 mm. 32 mm. 8 80 mm. 110,04 VAT included 71,53 VAT included
191.820.11 12 mm. 35 mm. 8 83 mm. 129,32 VAT included 84,06 VAT included
191.830.11 3 mm. 12 mm. 8 60 mm. 40,87 VAT included 26,57 VAT included
191.840.11 4 mm. 15 mm. 8 60 mm. 40,87 VAT included 26,57 VAT included
191.850.11 5 mm. 17 mm. 8 60 mm. 45,26 VAT included 29,42 VAT included
191.860.11 6 mm. 27 mm. 8 70 mm. 47,34 VAT included 30,77 VAT included
191.870.11 7 mm. 32 mm. 8 80 mm. 58,19 VAT included 37,82 VAT included
191.890.11 9 mm. 32 mm. 12 83 mm. 115,17 VAT included 74,86 VAT included
191.900.11 10 mm. 32 mm. 12 83 mm. 116,39 VAT included 75,65 VAT included
191.901.11 10 mm. 42 mm. 12 90 mm. 131,88 VAT included 85,72 VAT included

Sharp technology with a new twist

A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer.

Increased feed rate and improved cutting quality for enhanced productivity with CMT.

TECHNICAL FEATURES:

  • Premium quality HWM.
  • 2 spiral cutting edges (Z2).
  • Provide an excellent finish on the lower side of the workpiece.
  • Upward chip ejection.
Weight 0.085 kg
D

I

, , , , , , , , , , , , , , , , ,

S

, , , , , , , , , , , , ,

L

, , , , , , , , , , , , , ,

Gr.

10, 100, 110, 130, 140, 150, 170, 180, 20, 210, 240, 30, 340, 350, 40, 50, 60, 70, 80