Edge-fluting router bits
€40,02 – €43,68 VAT included €26,01 - €28,39 VAT included
Your All Available Variations
| Code | H | S | D | I | L | R | prezzo | Disp. | Scegli quantità |
|---|---|---|---|---|---|---|---|---|---|
| 762.032.11 | 105 mm. | 6 | 19,05 mm. | 63,5 mm. | 57 mm. | 3,2 mm | |||
| 762.040.11 | 105 mm. | 6 | 20,7 mm. | 8 mm. | 57 mm. | 4 mm | |||
| 762.050.11 | 105 mm. | 6 | 22,7 mm. | 10 mm. | 57 mm. | 5 mm | |||
| 862.032.11 | 105 mm. | 6,35 | 19,05 mm. | 63,5 mm. | 57 mm. | 3.2 mm | |||
| 862.040.11 | 105 mm. | 6,35 | 20,7 mm. | 8 mm. | 57 mm. | 4 mm | |||
| 862.050.11 | 105 mm. | 6,35 | 22,7 mm. | 10 mm. | 57 mm. | 5 mm |
Ricambi
| Prodotto | -- |
|
|---|---|---|
| 762.032.11 | 990.423.00 | 541.001.00 |
| 762.040.11 | 990.423.00 | 541.001.00 |
| 762.050.11 | 990.423.00 | 541.001.00 |
| 862.032.11 | 990.423.00 | 541.001.00 |
| 862.040.11 | 990.423.00 | 541.001.00 |
| 862.050.11 | 990.423.00 | 541.001.00 |
The edge-fluting bearing guided bits are quick to set up can be used for curved screens, small radius grooves, doors etc. no side fence required. Use in a handheld or table-mounted router.
Related Products
-
CMT 7/8/911 – Straight router bits, short series
€29,28 – €44,90 VAT included€19,03 - €29,19 VAT included -
CMT Diamond spiral router cutters with shear angle
€622,20 – €1.844,64 VAT included€404,43 - €1.199,02 VAT included -
-
CMT DP Flush trim router bits for laminates
€167,99 VAT included€109,19 VAT included
