191 – Solid carbide upcut spiral bits

191 – Solid carbide upcut spiral bits

0,00296,64 VAT included 0,00 - 192,82 VAT included

Your All Available Variations

Code H S D I L Z prezzo Disp. Scegli quantità
191.001.11 105 mm. 6,35 3,18 mm. 12,7 mm. 50,8 mm. 35,99 VAT included 23,39 VAT included
191.003.11 105 mm. 6,35 3,97 mm. 12,7 mm. 50,8 mm. 35,99 VAT included 23,39 VAT included
191.005.11 105 mm. 6,35 4,76 mm. 19,05 mm. 50,8 mm. 35,99 VAT included 23,39 VAT included
191.007.11 105 mm. 6,35 6,35 mm. 19,05 mm. 50,8 mm. 32,51 VAT included 21,13 VAT included
191.008.11 105 mm. 6,35 6,35 mm. 25,4 mm. 63,5 mm. 34,10 VAT included 22,17 VAT included
191.008.11-X10 mm. 6,35 6,35 mm. 25,4 mm. 63,5 mm. 2 --
191.030.11 110 mm. 3 3 mm. 12 mm. 50 mm. 26,96 VAT included 17,52 VAT included
191.040.11 110 mm. 4 4 mm. 15 mm. 50 mm. 29,52 VAT included 19,19 VAT included
191.050.11 110 mm. 5 5 mm. 17 mm. 50 mm. 35,99 VAT included 23,39 VAT included
191.060.11 105 mm. 6 6 mm. 27 mm. 70 mm. 40,02 VAT included 26,01 VAT included
191.080.11 105 mm. 8 8 mm. 22 mm. 70 mm. 45,57 VAT included 29,62 VAT included
191.081.11 105 mm. 8 8 mm. 32 mm. 80 mm. 50,33 VAT included 32,71 VAT included
191.082.11 230 mm. 8 8 mm. 42 mm. 90 mm. 57,77 VAT included 37,55 VAT included
191.100.11 110 mm. 10 10 mm. 32 mm. 80 mm. 78,87 VAT included 51,27 VAT included
191.101.11 230 mm. 10 10 mm. 42 mm. 90 mm. 92,42 VAT included 60,07 VAT included
191.120.11 110 mm. 12 12 mm. 35 mm. 83 mm. 110,59 VAT included 71,88 VAT included
191.121.11 230 mm. 12 12 mm. 42 mm. 90 mm. 123,04 VAT included 79,98 VAT included
191.122.11 230 mm. 12 12 mm. 52 mm. 100 mm. 128,04 VAT included 83,23 VAT included
191.140.11 230 mm. 14 14 mm. 50 mm. 110 mm. 175,50 VAT included 114,08 VAT included
191.160.11 230 mm. 16 16 mm. 55 mm. 110 mm. 214,29 VAT included 139,29 VAT included
191.161.11 230 mm. 16 16 mm. 35 mm. 90 mm. 191,42 VAT included 124,42 VAT included
191.200.11 230 mm. 20 20 mm. 60 mm. 120 mm. 296,64 VAT included 192,82 VAT included
191.501.11 110 mm. 12,7 7,94 mm. 25,4 mm. 76,2 mm. 103,94 VAT included 67,56 VAT included
191.503.11 110 mm. 12,7 9,52 mm. 31,75 mm. 76,2 mm. 103,94 VAT included 67,56 VAT included
191.505.11 110 mm. 12,7 12,7 mm. 31,75 mm. 76,2 mm. 103,94 VAT included 67,56 VAT included
191.506.11 230 mm. 12,7 12,7 mm. 38,1 mm. 88,9 mm. 120,72 VAT included 78,47 VAT included
191.507.11 230 mm. 12,7 12,7 mm. 50,8 mm. 101,6 mm. 136,09 VAT included 88,46 VAT included
191.509.11 230 mm. 15,88 15,88 mm. 55 mm. 109,5 mm. 186,05 VAT included 120,93 VAT included
191.511.11 230 mm. 19,05 19,05 mm. 55 mm. 109,5 mm. 273,04 VAT included 177,48 VAT included
191.630.11 105 mm. 6 3 mm. 12 mm. 60 mm. 38,13 VAT included 24,78 VAT included
191.640.11 105 mm. 6 4 mm. 15 mm. 60 mm. 38,13 VAT included 24,78 VAT included
191.650.11 105 mm. 6 5 mm. 17 mm. 60 mm. 37,82 VAT included 24,58 VAT included
191.800.11 105 mm. 8 10 mm. 32 mm. 80 mm. 98,27 VAT included 63,88 VAT included
191.820.11 105 mm. 8 12 mm. 35 mm. 83 mm. 115,47 VAT included 75,06 VAT included
191.830.11 105 mm. 8 3 mm. 12 mm. 60 mm. 36,54 VAT included 23,75 VAT included
191.840.11 105 mm. 8 4 mm. 15 mm. 60 mm. 36,54 VAT included 23,75 VAT included
191.850.11 105 mm. 8 5 mm. 17 mm. 60 mm. 40,44 VAT included 26,29 VAT included
191.860.11 105 mm. 8 6 mm. 27 mm. 70 mm. 42,27 VAT included 27,48 VAT included
191.870.11 105 mm. 8 7 mm. 32 mm. 80 mm. 51,97 VAT included 33,78 VAT included
191.890.11 110 mm. 12 9 mm. 32 mm. 83 mm. 102,85 VAT included 66,85 VAT included
191.900.11 110 mm. 12 10 mm. 32 mm. 83 mm. 103,94 VAT included 67,56 VAT included
191.901.11 230 mm. 12 10 mm. 42 mm. 90 mm. 117,79 VAT included 76,56 VAT included

Sharp technology with a new twist

A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer.

Increased feed rate and improved cutting quality for enhanced productivity with CMT.

TECHNICAL FEATURES:

  • Premium quality HWM.
  • 2 spiral cutting edges (Z2).
  • Provide an excellent finish on the lower side of the workpiece.
  • Upward chip ejection.
Weight N/A
h

, ,

S

, , , , , , , , , , , , ,

D

I

, , , , , , , , , , , , , , , , ,

L

, , , , , , , , , , , , , ,

Gr.

10, 100, 110, 130, 140, 150, 170, 180, 20, 210, 240, 30, 340, 350, 40, 50, 60, 70, 80

Z