CMT-Enlock joining system

CMT-Enlock joining system

17,87347,70 VAT included 11,62 - 226,01 VAT included

Your All Available Variations

Code H DIM S Materiale Desc. QTY prezzo Disp. Scegli quantità
718.098.11B 105 mm. D=9.5×9.5×60.3 C/CUSC 6 HWM Fresa per unione a coda di rondine HWM 1 41,66 VAT included 27,08 VAT included
718.127.11B 105 mm. D=12.7×12.7×52.5 C/CUSC 6 HWM Fresa per unione a coda di rondine HWM 1 38,13 VAT included 24,78 VAT included
818.098.11B 105 mm. D=9.52×9.5×60.3 C/CUSC 6,35 HWM Fresa per unione a coda di rondine HWM 1 41,66 VAT included 27,08 VAT included
818.128.11B 105 mm. D=12.7×12.7×52.4 C/CUSC 12,7 HWM Fresa per unione a coda di rondine HWM 1 38,13 VAT included 24,78 VAT included
CMT-ENLOCK1 . mm. . . . Sistema di giunzione a coda di rondine 1 347,70 VAT included 226,01 VAT included
CMT-ENLOCK10 10 mm. 9,5 . . Masterpack 50 tasselli 50 17,87 VAT included 11,62 VAT included
CMT-ENLOCK15 10 mm. 12,7 . . Masterpack 50 tasselli 50 21,66 VAT included 14,08 VAT included

The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike. Admired for its attractiveness in box and exposed joint projects, the dovetail is remarkably strong and functional. CMT dovetail bits are designed to fit all popular jigs including Leigh, Keller, JoinTECH and Omnijig systems. You are sure to find the bit you are looking for in our vast selection of cutting sizes and angles. Check the overall length of the bit before placing an order to be sure you get the size you need – CMT makes bits specifically to fit on jigs and routers that require a longer shank length.

 

Shop tips: two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the workpiece. For even easier routing and less stress on your dovetail bit, run the first pass with a straight bit. Use a dovetail on your router table equipped with a fence to achieve difficult chamfer angles.

 

Safety tips: if a dovetail bit jams while working, adjust the position of the bit in the collet and make sure the cutting depth is correct. Do not lift the router out of the template.

Weight N/A
h

, ,

DIM

, , , , , ,

S

, , ,

Materiale

,

Gr.

150, 4750, 80, 90

Desc.
QTY

,